vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.0 page 1 of 5 set your site on vicor at vicorpower.com product highlights the vi-j00 minimod family established a new standard in component-level dc-dc converters. this junior size complement to the higher pow er vi-200 family offers up to 100 w of isolated and regulated power in a board mounted packag e. with thousands of input/output/power combinations, and with a maximum operati ng temperature rating of 100?c, the minimod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements. utilizing vicors zero-current-sw itching forward converter tec hnology, proven by an installed base of over 8 million units, the minimod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. features ? rohs compliant (ve versions) ? up to 50 watts per cubic inch ? culus, ctvus ? ce marked ? up to 90% efficiency ? size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7) ? remote sense and current limit ? logic disable ? wide range output adjust ? zcs power architecture ? low noise fm control ? isolated output data sheet vi-j00, ve-j00 half brick dc-dc converters 25 to 100 watts low line voltage 75% transient [a] vin 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95 nom. (range) max power designators zy 0xwvtrm1p 2n3l jk4hfdb 12 (10-20) n/a 22 0 xxyyyyyyxxxxxxxxxxxxxx 24 (10-36) n/a n/a v --yyyyyyyyyyyyyyyyy-------- 24 (21-32) 18 36 1 wwwwwwx xwwwwwwwwwwwwww 24 (18-36) n/a n/a w wwwwwwx xwwwwwwwwwwwwww 36 (21-56) 18 60 2 y y y y y y y y x x x x x x x x x x x -- -- -- 48 (42-60) 36 72 3 wwwwwwx xwwwwwwwwwwwwww 48 (36-76) n/a n/a n ww x x x x x xwwwwwwwwwwwwww 72 (55-100) 45 110 4 wwwwwwx xwwwwwwwwwwwwww 110 (66-160) n/a n/a t ww x x x x x xwwwwwwwwwwww-- -- 150 (100-200) 85 215 5 wwwwwwx xwwwwwwwwwwwwww 150 (100-375) 170 425 7 y y y y y y y y x x x x x x x x x x x -- -- -- 300 (200-400) 90 n/a 6 wwwwwwx xwwwwwwwwwwwwww vi j 6 1 c w family series input output grade power vi = non-rohs j =j00 0 = 12 v n =48v z =2v m =10v k =40v e = C10 to 100c w = 100 w ve = rohs v = 24 v 4 =72v y = 3.3 v 1 =12v 4 =48v c = C25 to 100c x = 75 w 1 =24v t =110v 0 =5v p = 13.8 v h =52v i = C 40 to 100c y = 50 w w =24v 5 = 150 v x = 5.2 v 2 =15v f =72v m = C55 to 100c z = 25 w 2 =36v 6 = 300 v w = 5.5 v n = 18.5 v d =85v 3 =48v 7 = 150/300 v v = 5.8 v 3 =24v b =95v t = 6.5 v l =28v r = 7.5 v j =36v part numbering [a] transient voltage for 1 second. vout designators output input maximum power available for vi-jxx-xx note: for additional packaging options, please see page 4.
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.0 page 2 of 5 set your site on vicor at vicorpower.com converter specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions inrush charge 60 x 10 -6 60 x 10 -6 100 x 10 -6 coulombs nominal line input reflected 10% 10% i in nominal line, full load ripple current C pp input ripple rejection db 120 hz, nominal line db 2400 hz, nominal line no load power dissipation 1.35 2 1.35 2 watts 25 + 20 log ( vin ) vout 30 + 20 log ( vin ) vout 20 + 20 log ( vin ) vout vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions setpoint accuracy 1% 2% 0.5% 1% v nom load/line regulation 0.5% 0.05% 0.2% v nom ll to hl, 10% to full load 1% 0.2% 0.5% v nom ll to hl, no load to 10% output temperature drift 0.02 0.01 0.02 % / c over rated temperature long term drift 0.02 0.02 % / 1k hours output ripple C pp: 2 v, 3.3 v 200 100 150 mv 20 mhz bandwidth 5 v 5% 2% 3% v nom 20 mhz bandwidth 10 C 48 v 3% 0.75% 1.5% v nom 20 mhz bandwidth trim range [a] 50% 110% 50% 110% v nom total remote 0.5 0.5 volts 0.25 v max. neg. leg sense compensation current limit 105% 135% 105% 125% i nom automatic restart short circuit current 105% 140% 105% 130% i nom vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions gate out impedance 50 50 ohms gate in impedance 1000 1000 ohms gate in high threshold 6 6 volts use open collector gate in low threshold 0.65 0.65 volts gate in low current 6 6 ma [a] 10 v, 12 v, 15 v outputs, or v input range have standard trim range 10%. consult factory for wider trim range. 95 v output C50 + 0% trim range. input specifications output characteristics control pin specifications
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.0 page 3 of 5 set your site on vicor at vicorpower.com converter specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions input to output 3,000 3,000 v rms baseplate earthed output to baseplate 500 500 v rms input to baseplate 1,500 1,500 v rms vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions efficiency 78 C 88% 80 C 90% baseplate to sink 0.14 0.14 c/watt with vicor p/n 20267 vi-j00 e-grade vi-j00 c-, i-, m-grade parameter min typ max min typ max units test conditions weight 2.9 3.2 3.6 3.4 3.8 4.1 ounces 82.8 92 101.2 96.3 107 117.7 grams dielectric withstand characteristics thermal characteristics mechanical specifications parameter storage operating units notes e -20 to +105 -10 to + 100 c c -40 to +105 -25 to + 100 c i -55 to +105 -40 to + 100 c m -65 to +105 -55 to + 100 c product grade temperatures
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.0 page 4 of 5 set your site on vicor at vicorpower.com mechanical drawing 5 6 7 8 9 4 3 2 1 0.080 dia (2) places 0.080 dia (2) places solder plate matte tin over copper over copper alloy alloy 0.040 (1,0) dia (7) places 0.040 dia (7) places matte tin over copper solder plate over copper alloy alloy .01 aluminum base product id this surface function +in -in +out trim ?sense ?out pin # 1 2 3 4 5 6 7 8 9 full r +.030 (0,76) -.000 (0) (5,6) min. (7,6) min. (44,4) max. (61,0) (57,9) (3,0) (12,7) 1.90 .65 (16,5) .49 (12,4) .30 .015 (7,6) (0,38) .15 2.10 (53,4) (33,0) .40 (10,2) .35 .015 (8,9) (0,38) 1.40 (35,6) 1.00 (25,4) .70 (17,8) gate in gate out +sense vi-j00 2.28 1.30 (3,8) .15 (3,8) (48,3) .22 .12 .50 .30 2.40 1.75 standard rohs standard rohs flangeless package flangeless package with integral heat sink to order the slimmod configuration add the suffix ? ? s? to the standard module part number. qty (2) grounding clips are included with each slimmod p/n 32187 available with longitudinal or transverse fins of 0.25" or 0.50" height. add the appropriate suffix to the module part number. qty (4) grounding clips are included with each finmod f1, f2 p/n 32185 f3, f4 p/n 32186 to order the busmod fully assembled, add suffix ??b1? to the standard module part number. to order the busmod separately: half-sized busmod ? p/n 18952 2.28"l x 1.80"w x 0.50"h (57,9 x 45,7 x 12,7 mm) longitudinal, 0.25" fins ? add suffix ?? f1? longitudinal, 0.50" fins ? add suffix ?? f2? transverse, 0.25" fins ? add suffix ?? f3? transverse, 0.50" fins ? add suffix ?? f4? packaging options 2.28"l x 2.40"w x 1.08"h (57,9 x 61,0 x 27,4 mm) 1 up ? 2.58 x 2.5 x 0.62 (65,5 x 63,5 x 15,7 mm) 2 up ? 2.58 x 4.9 x 0.62 (65,5 x 124,5 x 15,7 mm) 3 up ? 2.58 x 7.3 x 0.62 (65,5 x 185,4 x 15,7 mm) megamod jr. chassis mount alternatives, one, two, or three outputs: up to 300 w busmod
vicor corp. tel: 800-735-6200, 978-470-2900 fax: 978-475-6715 vi-j00 minimod dc-dc converters 25 to 100 watts rev. 2.0 3/09 set your site on vicor at vicorpower.com vicor corporation 25 frontage road andover, ma, usa 01810 tel: 800-735-6200 fax: 978-475-6715 email customer service: custserv@vicorpower.com technical support: apps@vicorpower.com vicors comprehensive line of power solutions includes high density ac-dc and dc-dc modules and accessory components, fully configurable ac-dc and dc-dc power supplies, and complete custom power systems. information furnished by vicor is believed to be accurate and reliable. however, no responsibility is assumed by vicor for its use. vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunction could result in injury or death. all sales are subject to vicors terms and conditions of sale, which are available upon request. specifications are subject to change without notice. intellectual property notice vicor and its subsidiaries own intellectual property (including issued u.s. and foreign patents and pending patent applications) relating to the products described in this data sheet. interested parties should contact vicor's intellectual property department. warranty vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal use and service. this warranty does not extend to products subjected to misuse, accident, or improper application or maintenance. vicor shall not be liable for collateral or consequential damage. this warranty is extended to the original purchaser only. except for the foregoing express warranty, vicor makes no warranty, express or implied, including, but not limited to, the warranty of merchantability or fitness for a particular purpose. vicor will repair or replace defective products in accordance with its own best judgement. for service under this warranty, the buyer must contact vicor to obtain a return material authorization (rma) number and shipping instructions. products returned without prior authorization will be returned to the buyer. the buyer will pay all charges incurred in returning the product to the factory. vicor will pay all reshipment charges if the product was defective within the terms of this warranty. information published by vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. vicor reserves the right to make changes to any products without further notice to improve reliability, funct ion, or design. vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con- vey any license under its patent rights nor the rights of others. vicor general policy does not recommend the use of its compo- nents in life support applications wherein a failure or malfunction may directly threaten life or injury. per vicor terms and conditions of sale, the user of vicor components in life support applications assumes all risks of such use and indemnifies vic or against all damages.
|
